Brock Arnaud

• Job task consisted of walking down circuits and visual inspections, identifying any AOCs.

• Completing UT Thickness inspection along with any RT inspection that may be required.

• Identifying items and drawing isometric drawings as needed.

• Use of SFDs / P&IDs to track down lines start to finish. Break down SFDs / P&IDs to identify lines that require baseline and track circuit coverage.

• Operating as work management for multiple crews. Maintained a strong safety culture within the NDT department by adhering to established best practices and promoting awareness among team members.

• Performed Magnetic Particle and Penetrant testing to assess weld integrity and quality.

• Job task consisted of walking down circuits and visual inspections, identifying any AOCs.
• Completing UT Thickness inspection along with any RT inspection that may be required.
• Identifying items and drawing isometric drawings as needed.
• Use of SFDs / P&IDs to track down lines start to finish.
• Break down SFDs / P&IDs to identify lines that require baseline and track circuits coverages.
• Operating as work management for multiple crews.
• Maintained a strong safety culture within the NDT department by adhering to established best practices and promoting awareness among team members.

• Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
• Threaded pipes using piping machines.
• Followed safe work practices, which included fall protection and personal protective equipment.
• Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.

• Evaluated materials for quality and sorted parts and final products.
• Maintained correct temperature, levels and pressures on process systems and equipment.
• Identified machinery issues and repaired parts to keep equipment up and running.
• Practiced safe lockout-tagout procedures to prevent injury to personnel during maintenance procedures.
• Cleaned pressure vessel equipment by using scrapers, wire brushes and cleaning solvents.
• Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
• Verified pressure vessels were opened, cleaned and repaired.
• Signaled to crane operator to lift components to specific positions.
• Used hoist to load structural parts of boilers, pressure vessels and tanks on pallets.
• Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
• Identified issues and brought to attention of foreman.
• Managed movement of materials and equipment to different job sites.

• Verified pressure vessels were opened, cleaned and repaired.
• Followed all safety procedures and protocols to remain compliant with both employer and client.
• Cleaned pressure vessel equipment by using scrapers, wire brushes and cleaning solvents.
• Examined boilers, pressure vessels, tanks and vats to locate defects, including leaks, weak spots and defective sections.
• Marked all reference points for columns and plates on foundations using master straightedge.
• Used hoist to load structural parts of boilers, pressure vessels and tanks on pallets.
• Identified issues and brought to attention of foreman.
• Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.

• Followed all safety procedures and protocols to remain compliant with both employer and client.
• Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.
• Inspected and assembled vessels and individual components, including tubes, fittings, valves, controls and auxiliary mechanisms to locate any defects.
• Cleaned pressure vessel equipment by using scrapers, wire brushes and cleaning solvents.
• Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
• Examined boilers, pressure vessels, tanks and vats to locate defects, including leaks, weak spots and defective sections.
• Identified issues and brought to attention of foreman.

• Threaded pipes using specified machinery.
• Managed movement of materials and equipment to different job sites.
• Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Identified and located required tools prior to starting each project.
• Performed pipe fabrication, installation and fitting according to proper specifications.
• Cut and beveled piping using cutting torches, saws and threading machines.
• Performed site evaluations, customer surveys and team audits.
• Demonstrated self-reliance by meeting and exceeding workflow needs.

• Calibrated machinery to optimize performance according to prescribed standards and specific project needs.
• Operated hand tools, drill presses, riveting machines and tap burners to safely produce projects.
• Fabricated tools, jigs and fixtures to meet manufacturing and engineering needs.
• Selected appropriate speeds and feeds according to metal type and finish specifications.
• Measured, marked and indicated dimensions and reference points on materials.
• Measured and marked dimensions and reference points to meet precise specifications.
• Gauged and maintained tolerances on grinding diameters, depths, squareness and parallelism.
• Constructed appropriate offset corrections for tool wear, broken tools and casting variations.
• Machining of oilfield tools and Components.
• Read blueprints and Isometric drawings for details.
• Write programs according to prints for proper machining.
• Perform machine setup prior to machining.