Michael Noone
Metairie
Summary
Dedicated electrician with extensive experience in executing electrical installations and maintenance. Known for strong teamwork, attention to safety, and effective problem-solving skills, contributing to successful project completion and compliance with codes.
Overview
13
13
years of professional experience
Work History
Electrician
tradesource
Metairie
10.2025 - Current
- Installed electrical systems in residential and commercial buildings.
- Interpreted blueprints and technical drawings for installations.
- Adhered to safety protocols and regulations during all tasks.
- Ensured tools and equipment remained in optimal working condition to support efficient operations.
- Trained new electricians on best practices to enhance team skillsets and safety compliance.
- Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
- Installed conduit and wiring systems in various locations.
- Connected electrical wires to circuit breakers and transformers in compliance with safety standards.
- Connected electrical wires to circuit breakers and transformers for power distribution.
- Ensured that all work was completed in accordance with applicable codes.
- Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
- Diagnosed electrical circuit issues and implemented corrective measures to restore functionality and prevent future failures.
- Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
- Interpreted schematics, blueprints and diagrams to complete projects on time.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Pulled insulated wires or cables through conduits to complete circuits.
- Dismantled electrical components using hand tools to disconnect and restore wiring connections.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Fabricated parts according to specifications using hand and power tools.
- Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
Electrician
magnum electric
Fargo
03.2025 - 10.2025
- Installed electrical systems in residential and commercial buildings.
- Collaborated with team members to complete projects on schedule.
- Interpreted blueprints and technical drawings for installations.
- Adhered to safety protocols and regulations during all tasks.
- Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers, transformers, or other components.
- Ensured that all work was completed in accordance with applicable codes.
- Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
- Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
- Implemented safety systems and installed emergency lighting, uninterruptible power systems, and battery systems to enhance safety.
- Interpreted schematics, blueprints and diagrams to complete projects on time.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Pulled insulated wires or cables through conduits to complete circuits.
- Dismantled electrical components using hand tools to disconnect and restore wiring connections.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Fabricated parts according to specifications using hand and power tools.
- Addressed and resolved worksite safety hazards to reduce risk.
Electrician
Protech
Jonesboro
08.2024 - 03.2025
- Installed electrical systems in residential and commercial buildings, ensuring compliance with safety standards.
- Adhered to safety protocols and regulations during all tasks.
- Performed installations, maintenance, and repairs of electrical systems, wiring, fixtures, and components to ensure reliable operation.
- Connected wires to circuit breakers, transformers, or other components.
- Connected electrical wires to circuit breakers and transformers for power distribution.
- Ensured that all work was completed in accordance with applicable codes.
- Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Pulled insulated wires or cables through conduits to complete circuits.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Fabricated parts according to specifications using hand and power tools.
- Identified and resolved worksite safety hazards, enhancing overall safety protocols.
Electrician
dixieland electric
Mandeville
05.2020 - 07.2024
- Installed electrical systems in residential and commercial buildings.
- Diagnosed electrical issues and performed repairs efficiently.
- Collaborated with team members to ensure timely completion of projects.
- Interpreted blueprints and technical drawings for installations.
- Adhered to safety protocols and regulations during all tasks.
- Maintained tools and equipment in good working condition.
- Assisted in training new electricians on best practices.
- Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
- Connected wires to circuit breakers, transformers, or other components.
- Connected electrical wires to circuit breakers and transformers to establish reliable electrical systems.
- Repaired or replaced worn or defective parts using hand tools and power tools.
- Completed all work in accordance with electrical codes.
- Followed safety procedures when working on energized circuits. Observed lockout and tagout requirements when servicing equipment.
- Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
- Diagnosed electrical circuit and equipment issues, implementing corrective measures for effective repairs.
- Interpreted schematics, blueprints and diagrams to complete projects on time.
- Installed grounding system per NEC code requirements.
- Evaluated electrical systems and components, identifying and resolving defects to enhance safety.
- Diagnosed malfunctioning systems using schematic diagrams and test instruments such as digital multimeters.
- Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
- Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Pulled insulated wires or cables through conduits to complete circuits.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Trained workers to install, maintain and repair electrical equipment and fixtures.
- Planned layout and installation of wiring and fixtures based on project specifications and building codes.
- Addressed and resolved worksite safety hazards to reduce risk.
- Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
Electrician
Staffmark
Metairie
09.2018 - 04.2020
- Installed electrical systems in residential and commercial buildings.
- Adhered to safety protocols and regulations during all tasks.
- Executed electrical installations, maintenance, and repairs of systems, wiring, fixtures, and components to ensure functionality and compliance.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers, transformers, or other components.
- Connected electrical wires to circuit breakers and transformers in compliance with safety standards.
- Verified all work complied with safety codes.
- Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
- Interpreted schematics, blueprints, and diagrams to ensure timely project completion and adherence to specifications.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Installed grounding system per NEC code requirements.
- Provided technical support on various types of motor control circuits including VFDs.
- Pulled insulated wires or cables through conduits to complete circuits.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Fabricated parts according to specifications using hand and power tools.
- Identified and mitigated worksite safety hazards to enhance overall safety standards.
Electrical Apprentice
Margiotta Electric
New Orleans
03.2016 - 09.2018
- Assisted electricians with installation of wiring and electrical systems.
- Followed safety protocols while working on electrical projects and installations.
- Collaborated with team members to troubleshoot and resolve electrical issues, enhancing project efficiency.
- Supported senior electricians in diagnosing and repairing electrical faults.
- Prepared work areas by organizing materials and tools for upcoming tasks.
- Learned building codes and regulations relevant to electrical installation practices.
- Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
- Pulled wires through conduit runs using fish tapes or pull strings when necessary.
- Assisted with electrical installations, incorporating new wiring and adjusting breaker boxes to meet project requirements.
- Replaced defective circuit breakers, fuses, switches, outlets, lighting fixtures and other components as needed.
- Collaborated with team members to successfully complete various electrical projects.
- Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Installed conduit systems including EMT, rigid conduit, flexible conduit.
- Maintained organization, cleanliness, and safety in work areas.
- Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
- Adhered to company standards and OSHA regulations for work site safety.
- Completed semi-skilled and skilled work under supervision of fully qualified professionals.
- Kept work areas clean, neat, and free of hazards.
- Reviewed blueprints and electrical schematics to ensure accurate execution of installation tasks per specifications.
- Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
- Installed new electrical components, fixtures, and motors.
- Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
- Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
- Dug trenches and created holes to pull conduit and install supports.
- Assembled junction boxes according to code requirements.
- Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
- Installed ground fault circuit interrupter outlets per code requirements.
- Inspected existing wiring to identify short circuits.
- Measured and prepared supplies for electrical tasks.
- Resolved issues with existing systems and replaced malfunctioning parts.
- Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
- Identified problems with circuits or equipment using testing devices such as multimeters or oscilloscopes.
- Assisted in the planning of new installations by studying customer requirements and following approved specifications.
- Connected cables from service entrance to meters and main distribution panel boards.
- Followed relevant electrical and building codes for each job.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Pulled insulated wires or cables through conduits to complete circuits.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Reviewed blueprints to determine electrical component and wiring locations.
- Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
- Fabricated parts according to specifications using hand and power tools.
Helper
flettrich services
Abita Springs
09.2012 - 04.2015
- Installed HVAC systems in residential and commercial buildings efficiently.
- Performed routine maintenance on heating and cooling equipment, ensuring optimal performance and reliability.
- Diagnosed and resolved issues in HVAC units, enhancing system functionality and customer satisfaction.
- Utilized hand tools such as wrenches, screwdrivers, drills, saws, as well as power tools like pipe cutters and benders when performing tasks related to HVAC installations.
- Performed installation of residential and commercial HVAC systems, including air conditioning units, furnaces, heat pumps, air handlers, and ductwork.
- Installed condensate lines, gas piping, venting systems for water heating appliances, exhaust fans.
- Wired both line and low voltage to heating and cooling equipment.
- Troubleshot HVAC system issues using appropriate tools and test equipment.
- Pulled electrical wiring for new installations or repairs to existing HVAC systems.
- Maintained safe working environment with proper execution of HVAC guidelines and usage of PPE equipment.
- Serviced residential and commercial heating and air conditioning units, delivering timely and effective solutions to customer needs.
- Adhered strictly to all applicable codes when installing new HVAC systems.
- Followed manufacturer's specifications for installation and repair procedures.
- Ensured that all safety protocols were followed while working onsite at customer locations.
- Conducted brazing, threading pipe and tasks to complete service calls.
- Repaired or replaced defective parts during service calls.
- Communicated regularly with supervisor regarding progress on projects and any challenges encountered during the course of work.
- Reported problems with company tools and vehicles to crew foreman for quick resolution.
- Attended training sessions related to new products or techniques in order to stay current in industry standards.
- Inspected job sites prior to beginning work to identify any potential safety hazards or obstacles that could affect the job.
- Conducted maintenance on existing HVAC systems to ensure proper operation and energy efficiency.
- Answered service calls to address ventilation, air conditioning and heating system issues.
- Examined heating and air conditioning systems and air compressors for signs of defects or malfunction.
- Installed, maintained and repaired commercial refrigeration systems.
- Adept at reading blue prints of electrical equipment.
- Utilized HVAC diagnostic software and tools to accurately identify and resolve system issues.
- Conducted regular system inspections and preventative maintenance tasks, reducing system downtime and repair costs.
- Performed ductwork repairs and modifications to improve system airflow and indoor air quality.
- Diagnosed and repaired faults in HVAC systems, including refrigerant leaks, electrical issues, and mechanical failures.
- Installed furnaces, boilers and A/C units in new and existing buildings and assessed functionality of existing units.
- Put in new gas lines, wiring and other support components for HVAC systems.
- Conducted leak tests on pipe and tubing joints to ensure system integrity.
- Read technical manuals and schematics to understand specific configurations.
- Completed basic repairs such as changing belts, servicing fans and motors and cleaning coils, strainers and filters to optimize equipment performance.
Education
High School Diploma -
Emerson Academy
Slidell, LA01-2001
Some College (No Degree) - automotive
Louisiana Technical Collage
Slidell, LASkills
- Electrical installations
- Circuit diagnosis
- Fault diagnosis
- Blueprint interpretation
- Residential construction
- Problem solving
- Team collaboration
Timeline
Electrician
tradesource
10.2025 - Current
Electrician
magnum electric
03.2025 - 10.2025
Electrician
Protech
08.2024 - 03.2025
Electrician
dixieland electric
05.2020 - 07.2024
Electrician
Staffmark
09.2018 - 04.2020
Electrical Apprentice
Margiotta Electric
03.2016 - 09.2018
Helper
flettrich services
09.2012 - 04.2015
High School Diploma -
Emerson Academy
Some College (No Degree) - automotive
Louisiana Technical Collage