Summary
Overview
Work History
Education
Skills
Timeline
Generic

TRUMAN OWENS

Bush,LA

Summary

Dynamic electrician with extensive experience at Mike Bowen Contractors, specializing in electrical installations and troubleshooting. Proven ability to enhance system reliability and client satisfaction through effective communication and attention to detail. Skilled in wiring installation and safety management, ensuring compliance with the National Electrical Code while delivering high-quality workmanship on residential and commercial projects.

Knowledgeable Electrician with solid background in electrical systems and installations. Proven ability to troubleshoot and repair complex electrical issues, ensuring safety and efficiency. Demonstrated effective problem-solving and critical thinking skills in high-pressure environments.

Overview

35
35
years of professional experience

Work History

Electrician

Mike Bowen Contractors
New Orleans, Louisiana
02.2018 - 12.2024
  • Assisted in installation and repair of electrical systems under supervision.
  • Learned and applied safety protocols to maintain a safe work environment.
  • Familiarized with electrical tools and equipment for effective task completion.
  • Supported team in troubleshooting electrical issues for residential projects.
  • Participated in electrical system inspections to ensure compliance with regulations.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
  • Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
  • Performed routine and complex maintenance and repairs on various electrical equipment.
  • Stored and maintained power tools and equipment for each job.
  • Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
  • Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
  • Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
  • Reduced downtime for clients by quickly diagnosing and repairing complex electrical issues.
  • Collaborated with construction teams to ensure seamless integration of electrical systems within new builds.
  • Developed strong working relationships with clients through consistent professionalism, reliability, and transparency during projects.
  • Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
  • Provided exceptional customer service through clear communication, accurate estimates, and timely project completion.
  • Enhanced customer satisfaction by providing timely and effective troubleshooting for electrical issues, leading to minimal disruption.
  • Ensured safety and compliance with local electrical codes by meticulously inspecting and upgrading wiring systems in residential buildings.
  • Enhanced electrical system reliability in older homes by performing comprehensive rewiring, adhering to highest industry standards.
  • Increased customer trust with clear communication and detailed explanations of electrical work required and performed.
  • Contributed to safer work environments by strictly following safety protocols and conducting regular risk assessments.
  • Troubleshot and repaired malfunctioning systems and components.
  • Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
  • Replaced and repaired lighting fixtures and electrical control and distribution equipment.
  • Followed state and local building regulations based on National Electrical Code.
  • Running Residential jobs.
  • Pipe Bending and running Pipe

Electrician

Graci Electric
01.1995 - 02.2018
  • Enhanced quality control by inspecting condition of equipment and tools.
  • Achieved client satisfaction by prioritizing open communication throughout project stages.
  • Increased productivity by effectively managing multiple projects simultaneously while maintaining high-quality workmanship.
  • Optimized electrical system designs for new constructions, ensuring scalability and sustainability.
  • Examined electrical units for loose connections and broken insulation.
  • Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
  • Installed 120/208 volt systems and 347/600 volt systems.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
  • Performed routine and complex maintenance and repairs on various electrical equipment.
  • Stored and maintained power tools and equipment for each job.
  • Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
  • Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
  • Reduced downtime for clients by quickly diagnosing and repairing complex electrical issues.
  • Ensured safety and compliance with local electrical codes by meticulously inspecting and upgrading wiring systems in residential buildings.
  • Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
  • Spliced, joined and connected wire to fixtures and other electrical components.
  • Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
  • Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Troubleshot and repaired malfunctioning systems and components.
  • Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
  • Replaced and repaired lighting fixtures and electrical control and distribution equipment.
  • Doing both Residential and Commerical jobs.
  • Services Calls
  • Bending and running pipe
  • reading blue prints

Electrician

ECS Electric Company
Metairie, Louisiana
01.2015 - 01.2018
  • Collaborated with experienced electricians to gain hands-on experience in wiring techniques.
  • Documented work processes and observed best practices for future reference.
  • Engaged in continuous learning about new technologies and industry standards in electrical work.
  • Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
  • Maintained compliance with local codes and regulations by staying up-to-date on industry standards and best practices.
  • Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
  • Inspected worksites and installations to verify compliance with state safety codes.
  • Coordinated with other tradespeople seamlessly during large-scale installations or renovations to ensure smooth project progressions.
  • Assisted in the design phase of various projects, providing input on optimal lighting layouts, power distribution plans, and equipment specifications.
  • Utilized advanced diagnostic tools to pinpoint root causes of electrical failures accurately, minimizing repair timeframes for clients.
  • Enhanced team productivity, delegating tasks effectively and providing support where needed to meet tight deadlines.
  • Streamlined project completion times, coordinating with construction teams to ensure electrical work was done in alignment with overall project timelines.
  • Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
  • Spliced, joined and connected wire to fixtures and other electrical components.
  • Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
  • Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
  • Studied building schematics to determine location of wiring and equipment.
  • Learned and applied safety protocols to maintain a safe work environment.
  • Familiarized with electrical tools and equipment for effective task completion.
  • Supported team in troubleshooting electrical issues for residential projects.
  • Participated in electrical system inspections to ensure compliance with regulations.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
  • Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
  • Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
  • Troubleshot and repaired malfunctioning systems and components.
  • Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
  • Replaced and repaired lighting fixtures and electrical control and distribution equipment.
  • Followed state and local building regulations based on National Electrical Code.
  • Running Commerical and Residential Jobs
  • Running and Pipe bending
  • Reading Blueprints

Electrician Top Helper

Davis International
03.1990 - 02.1993
  • Assisted electricians in installing and repairing electrical systems and components.
  • Maintained tools and equipment to ensure optimal performance and safety standards.
  • Followed safety protocols while performing tasks to minimize risks on job sites.
  • Supported the troubleshooting of electrical issues under supervision, enhancing problem-solving skills.
  • Collaborated with team members to complete projects efficiently and effectively.
  • Working in Plants
  • Prepared work areas by organizing materials and tools for upcoming installations or repairs.
  • Observed experienced electricians, gaining knowledge of industry best practices and techniques.
  • Contributed to maintaining accurate records of work performed and materials used on-site.

Education

GED -

East Jefferson High School
Metairie, LA

Skills

  • Wiring installation
  • Electrical repairs
  • Electrical installation
  • Electrical troubleshooting
  • Electrical experience
  • Lighting systems
  • Works well in team environment
  • Electrical testing
  • Circuit testing
  • Fixture installation
  • Electrical panel upgrades
  • Electrical equipment maintenance
  • Wiring diagrams
  • Attention to detail
  • New construction
  • Voltmeter use
  • Residential construction
  • Power distribution
  • Control circuit troubleshooting
  • Safety management
  • Low-voltage systems
  • Commercial construction experience
  • Diagnostics
  • Commercial and residential projects
  • National electrical code
  • Valid LA driver's license
  • Diagnostic testing
  • Pipe installation expertise
  • Knowledge of national electric code (NFPA 70)
  • Blueprint fluency
  • System testing
  • Diagram interpretation
  • Circuit design
  • Previous technical support experience
  • Problem-solving
  • Critical thinking
  • Conduit bending
  • Electrical wiring
  • Circuit breaker installation
  • Junction box assembly

Timeline

Electrician

Mike Bowen Contractors
02.2018 - 12.2024

Electrician

ECS Electric Company
01.2015 - 01.2018

Electrician

Graci Electric
01.1995 - 02.2018

Electrician Top Helper

Davis International
03.1990 - 02.1993

GED -

East Jefferson High School
TRUMAN OWENS